RCM 150 Rough Cut Mower
Weight 650 lbs
HP Required 30+
Hitch style CAT I
Width of cut 60"
Number of Blades 2
Replaceable cutting tips Yes
Stump Jumper STD.
Tail Wheel STD.

Equipment for Small Farms

Brush Mower

Brush Mower

Finishing Mower

Finishing Mower

Finishing Mower SpecsFM-180
Cutting Width 180 cm (72")
Cutting Height 1"-4"
Power Required 30-70 HP
Wheel Size Solid Rubber 8x3"
Number of Blades 3
3 PTH Category Cat I
PTO Speed 540
Weight235 kg (518 lbs)


SB 6 Box Blade Specs
Weight 350 lbs
HP Required 25+
Hitch style CAT I
Width of cut 72"
Number of Ripper teeth 6
Replaceable cutting tips Yes
Cutting blade Front + rear

Utility Box


BX42 Specs
Drive System Direct Drive PTO W/Shear Bolt-No Gearbox
Chipping Capacity 4" Diameter
Chip Size 3/4"
Rotor Size 25"
Number of knives 4
Rotor Weight110 lbs
Feeding TypeGravity feed
Discharge Hood Rotation 360
Discharge Height 60"
Rated RPM540
Weight 625 lbs
HP Required 20+
Hitch style CAT I

DEVONN Rototiller Specifications

  • 1GN series rototiller is designed for tougher conditions.
  • The blades are heavier and the rotor will withstand tougher use.
  • 6 blades per rotor
  • Adjustable shoes for depth control.
  • Depth shoes can be used to regulate the power required to turn tiller.
  • If your tractor is small, reduce depth and tiller will pull easier.
  • Can be used on any tractor 30 – 100 HP
  • SAE Cat I or II - 3 PTH.
  • Drive line is slip clutch protected
  • Gear drive transfer case means lower maintenance - no chainto keep tight
  • 1 year warranty
Width1.55 meter (66")1.80 meter (72")2.00 meter (84")
Maximum Depth18 cm (7")18 cm (7")18 cm (7")
No. teeth364248
Blades per rotor666
Weight480 lbs.800 lbs.910 lbs.
Power Required25 HP+40 HP+60 HP+
PTO Speed540540540
HitchCat ICat I or IICat I or II